Troubleshooting

The curve cannot be edited

Select the intended curve and enable its on/off control. A disabled curve does not accept point-editing gestures.

A processor seems to do nothing

Check incoming audio, global bypass, global dry/wet, the processor's on/off control and its dry/wet contribution. Compare a clear but small change with the processor enabled and disabled.

For Phase, check FIR Spectral, IIR Shifter, and their option switches to identify which path remains active.

Modulation is silent or static

Check source on/off, sync or trigger settings, matrix cell on/off and its limits. For Env or audio-triggered LFOs, verify the selected detector source. For sidechain operation, verify host sidechain routing too.

Processing changes when transport stops

Check Setup → Auto Bypass, which follows host transport state.

The display is slow

Try Graphics → FPS redux. Disable gradients if needed. If parts fail to redraw, try disabling Optimize paint. For processing load, revisit FFT and Window together rather than changing only display settings.

A Switcher slot recalls the wrong variation

Right-click to store before left-clicking to recall. Middle-click clears a slot's memory. For MIDI switching, enable the MIDI option and send notes on channel 1.